How to Reset Parking Sensors on Mercedes

If you have a Mercedes, there’s a good chance that your car has parking sensors. These sensors help you park your car more easily by providing an audio warning when you get too close to an object. However, sometimes these sensors can be a little too sensitive, and they’ll start beeping even when there’s plenty of room to park. In this guide, I’ll show you how to reset the parking sensors on your Mercedes.

Keep reading for instructions!

What might cause the sensors not to work?

There are several reasons why your parking sensors might not be working properly. It could be that the sensors are dirty and need to be cleaned, or it could be that there’s something blocking the sensors (like a piece of dirt or debris).

Another possible reason is that the sensors may have been damaged or knocked out of alignment. If you hit a curb or something else while parking, this could cause the sensors to stop working properly.

If you’re not sure what’s causing the problem, the best thing to do is to reset parking sensors on Mercedes.

How to Reset Parking Sensors on Mercedes using iCarsoft?

If your parking sensors are not working, you can use iCarsoft to reset them. iCarsoft is a professional OBD2 diagnostic tool that can be used to troubleshoot a variety of car problems.

If you have an iCarsoft, you can use it to reset the parking sensors on your Mercedes. Here’s how:

➤ Start the engine and let it idle for a few minutes.

➤ Connect the iCarsoft scanner to the OBD port.

➤ Select “Diagnose”

➤ Choose “Mercedes” from the list of manufacturers.

➤ Select your car model and year.

➤ Now you have to select diagnose mode. There will 2 options: Automatic and Manual Select. If you select Automatic, then it will diagnose every module of your car. However, you can also choose “Manual Select” and go for “Parktronic System“.

➤ Select “Read Fault Code” and you can write down the codes that occurring problems in your parking sensor.

➤ Select “Clear data” and it will reset the parking sensor.

That’s all there is to it! If you have an iCarsoft, this is a quick and easy way to reset the parking sensors on your Mercedes. Once you’ve reset the parking sensors, they should be working properly again.

If you’re still having trouble, you may need to take your car to a Mercedes dealership or service center for further diagnosis and repairs.

How to Reset Parking Sensors on Mercedes without iCarsoft?

Resetting the parking sensors on your Mercedes is a pretty simple process, whether you have an iCarsoft or not. If you don’t have an iCarsoft, you can still reset the parking sensors on your Mercedes. Here’s how:

➤ Turn on your car

➤ Connect a jump cable to your car’s battery.

➤ Start the car and let it run for about 30 minutes.

➤ Turn off the car and disconnect the jump cable from the battery.

Now, turn on your car and see if the parking sensors are working properly. If they’re still not working, you may need to take your car to a mechanic for further diagnosis.

How to recalibrate the sensors for a better parking experience

If your parking sensors are still giving you trouble, there’s one more thing you can try- recalibrating the sensors. This will help to ensure that the sensors are working properly and giving you the best possible parking experience. Here’s how to recalibrate the sensors on your Mercedes:

➽ Start by cleaning the sensors. Make sure there’s no dirt or debris blocking the sensors.

➽ Next, you’ll need to park your car in an open area. Once you’re parked, turn off the engine and get out of the car.

➽ Now, you’ll need to find the calibration button. This button is usually located near the parking sensors. Once you’ve found the button, press and hold it for about 5 seconds.

➽ You should hear a beeping sound coming from the sensors. This means that the calibration process has begun.

➽ Now, you’ll need to walk around your car, making sure to keep your hand close to the sensors. The sensors will beep as you walk around, and this is normal.

Once you’ve walked around the car completely, the calibration process will be complete. Your parking sensors should now be working properly.

Tips on troubleshooting parking sensors

Here are some tips to keep in mind if you’re having trouble with your parking sensors:

✅ Check for dirt or debris: If there’s dirt or debris blocking the sensors, this could be causing the problem. Clean the sensors and see if this solves the issue.

✅ Check for damage: If you hit a curb or something else while parking, this could damage the sensors. Inspect the sensors for any damage and replace them if necessary.

✅ Check the battery: A weak or dead battery can also cause problems with the parking sensors. If you think the battery may be the problem, try jump-starting the car or replacing the battery.

✅ Recalibrate the sensors: If the sensors are still giving you trouble, try recalibrating them. This will help to ensure that they’re working properly.

Take your car to a mechanic. If you’re still having trouble with your parking sensors, it’s time to take your car to a mechanic. They can diagnose the problem and make any necessary repairs.

FAQs

Q: How often should I reset my parking sensors?

A: There’s no need to reset your parking sensors regularly. However, if you find that the sensors are not working properly, you may need to reset them.

Q: Will resetting my parking sensors delete any saved data?

A: No, resetting your parking sensors will not delete any saved data.

Q: I don’t have an iCarsoft. Can I still reset my parking sensors?

A: Yes, you can still reset your parking sensors without an iCarsoft. All you need is a jump cable and a few minutes of time.

Q: My parking sensors are still giving me trouble after resetting them. What should I do?

A: If your parking sensors are still giving you trouble, you may need to recalibrate them. This will help to ensure that the sensors are working properly and giving you the best possible parking experience.

Q:  I’m having trouble finding the calibration button. Where is it located?

A: The calibration button is usually located near the parking sensors. If you’re having trouble finding it, consult your car’s owner’s manual.

Q: How to control Mercedes parking sensors warning volume?

A: The parking sensors on your Mercedes can be controlled using the multimedia screen. Just go to “Setting” and then select “Assistance“. From there you can tune the warning volume according to your preference.

Q: How to clean parking sensors?

If your parking sensors are giving you trouble, the first thing you should try is cleaning the sensors. Make sure there’s no dirt or debris blocking the sensors. You can use a soft cloth or brush to clean the sensors. Make sure you’re careful not to damage the sensors. Also, clean the area around the sensors so that they have a clear view.

Final Verdict

Resetting the parking sensors on your Mercedes is a pretty simple process, whether you have an iCarsoft or not. If you don’t have an iCarsoft, you can still reset the parking sensors on your Mercedes.

Just follow the steps outlined in this article and you’ll be able to reset the sensors in no time. If your parking sensors are still giving you trouble, you may need to recalibrate them. You may also need to clean the sensors or replace them if they’re damaged. This will help to ensure that the sensors are working properly and giving you the best possible parking experience.

Thanks for reading!